600/610 Steel Cement Raised Floor


Steel cement raised floor
600/610 Steel Cement Raised Floor
Steel cement raised floor is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. There is foaming cement fully filled, with corner-lock holes punched in four sides of the panel.

Model: FS662-FS1500
Size: 600*600mm, 24″*24″
Materials: steel, cement
Installation: corner lock systems

Office building, intelligent office environment, meeting room, commercial and industrial bureau, government, places that have requirements of dust-proof and water-proof, fields with wiring requirements, usually used with square carpet.

Designed specially for office building
Excellent load performance
Epoxy paint for life time protection
Class A flame spread & smoke developed index
500mm panel mainly for Japan, Korea and China Taiwan
24” / 610mm panel mainly for North America
Steel Cement Raised Floor Structure

Edge design
There are 2 types of edge designs for bare finish raised floor, one is fold edge, another one is cut edge. Fold edge design is more popular in 600*600mm panels, while cut edge design is mainly used in 24”*24” panels.

Technical parameters
The raised floor will be with a safety factor of three times the concentrated (design) load, and is capable of meeting static and dynamic loads per CISCA Platform (Raised Access) Floors Performance Specification.

The finished floor height(FFH) of the raised access floor, measured from the sub-floor to the top surface of the installed flooring system, shall be as shown in the contract drawings.

There are mainly 2 types of pedestals for bare finish raised floor, one is rod type pedestals for low height, another one is tube type pedestal for high height(normally above 300mm). Flat head pedestal as corner pedestal(the line close to the wall), and cross head pedestal(aluminum head pedestal) as central pedestal.